Publicidad
Idiomas disponibles
Idiomas disponibles
Turn the speaker power ON/OFF
11
1. Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the
orange line mark on the selector can not been seen),a voice prompt "Power on" and a
beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode indicator will flash
in blue.
2. To turn the unit off, slide the Power ON/OFF switch to OFF position (where the orange
round mark on the selector can been seen).
Operating the speaker in Bluetooth mode
Bluetooth involves a technology for wireless radio connection of devices over a short
distance. Devices with Bluetooth standard are transmitting between 2.402 and 2.480 GHz
in the ISM band (Industrial, Scientific and Medical). Interference can be caused, for
example by WLAN-networks, DAB radios, cordless phones, or microwave ovens which
work on the same frequency band.
• This speaker offers you the possibility to use a Bluetooth enabled device. The functional
radius is limited to approx.10 metres depending on the surroundings and the unit used.
• If your playing device supports the A2DP profile (Advanced Audio Distribution Profile) and
has a music-player function, then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By streaming, stereo-audio signals
are wirelessly transferred between the playing device (source) and the receiving device.
• Due to the different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Logging on devices (Pairing)
Before using your speaker with a compatible device, such as a mobile phone, for the first
time, you must pair and connect it to the device.
1. Ensure, that the Bluetooth function is activated in your player (e.g. mobile phone). For
this, refer to the operation manual of your player.
Publicidad
