Hilti TE DRS-6-A Manual De Instrucciones Original página 18

2.3 Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Contact Hilti Service.
3 Description
3.1 Product overview
3.2 Intended use
The TE DRS­6­A dust removal module dust removal module is an accessory for the Hilti TE 6­A36 and TE
6­A22 rotary hammer drills. It collects a high percentage of the dust and it attaches quickly and easily to
the rotary hammer drill. The dust removal module has a built-in extractor fan. This fan is driven by its own
motor. When the rotary hammer drill is switched on the dust removal module draws its electric power from
the rotary hammer drill's battery.
The dust removal module is not suitable for working on metal and wood.
Conditions: TE DRS-6-A OSHA
The TE DRS-6-A OSHA satisfies the requirements of OSHA 1926.1153 Table 1.
3.3 Items supplied
TE DRS-6-A dust removal module, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
Rated power input
Suction
Weight
12 English
1
Suction head
@
Stroke preset button
;
DRS electrical interface
=
DRS release button
%
Dust container release
&
Depth gauge
(
409098
60 W
250 ℓ/min
1.0 kg
*409098*