70mai Jump Starter Max Manual Del Usuario página 18

When the red light is turned
on and a buzzer sound can be
heard, the clips are connected
to the wrong ends. Connect
the clips correctly and make
sure the green light is turned
on before jump starting the
battery.
When the green light is
flickering and a buzzer sound
can be heard, the voltage
is too low. Press the boost
button and wait till the green
light stops flickering. Jump
start the battery within 30
seconds.
When both the green and
red lights are not turned on
and no buzzer sound can be
heard, the battery may be
completed damaged. Ensure
that the clips are connected
to the correct ends. Press the
boost button and wait till
the green light is turned on.
Jump start the battery within
30 seconds.
3. After the car is jump started, remove the battery
clips.
16