Synchronization Of The Bluetooth® Headset To A Cellular Phone Or Bluetooth® Adaptor - Intelbras HBT 1000 Manual Del Usuario

Note: if the headset is not connected to some device in 10 min. after being turned on, it
will automatically turn off.
Synchronization of the Bluetooth® headset to a cellular
phone or Bluetooth® adaptor
Before using the Bluetooth® headset for the first time, it is necessary to synchronize
it to a cellular phone or Bluetooth® adaptor.
Before trying to synchronize the headset to a cellular telephone, be sure that it has the
Bluetooth® function and that it is enabled for use. The procedure for synchronizing the
cellular phone varies in accordance with the model of the device; therefore, follow the
steps below and check the cellular phone or Bluetooth® adaptor instructions.
1. Keep the headset within a radius of 1 m distance from the cell phone or Bluetooth®
adaptor;
2. Check if the cellular phone or adaptor is turned on;
3. With the headset turned off, press the main button for more than 7 seconds until
the LED flashes in red and blue in an alternating way; that way the headset will
be in the synchronization mode;
4. Begin the Bluetooth® function in the cellular phone or adaptor for seeking
Bluetooth® devices. After the search is concluded, select the HBT1000 option
shown in the list of Bluetooth® devices available;
5. In accordance with the indication, type in the password or the PIN number 1234
and press Yes (Sim) or Confirm (Confirmar) to confirm;
6. After synchronization, the LED will flash in blue twice every 4 seconds.
Note:
The headset remains in the Synchronization mode for 2 minutes. If during this time
•
it is not able to find the device, it will automatically return to the Wait mode. If it is
necessary to continue the synchronism procedure, turn off the headset and then
execute procedures 1 to 6 again.
After synchronizing the headset for the first time, it will automatically try to connect to
•
the last cellular phone or adaptor synchronized to it every time it is turned on.
24