BRÖTJE KB3B SGB E Manual De Montaje página 12

About these instructions
GB
1. About these instructions
1.1 Contents of these
instructions
1.2 Used symbols
1.3 For whom is this manual
intended?
1.4 Standard delivery
12
Please read the instructions thoroughly before any modifications are made.
This manual contains installation instructions for the cascade kits KB3B SGB E for
gas condensing boilers of the EuroCondens SGB 400 E/SGB 470 E/SGB 540 E series
and KB4 SGB E for gas condensing boilers of the EuroCondens SGB 610 E series.
Also observe the Installation manual for gas condensing boilers SGB 400-610 E.
Danger! Danger exists for body and life in case it is not observed.
Danger of electric shock! In case it is not observed, danger from electricity exists
for body and life!
Caution! If warning is not observed, danger exists for environment and the device.
Note/tip: Here, you can find background information and useful tips.
Reference to additional information in other documents.
This installation manual is intended for the heating specialist, who installs the ac-
cessory.
Standard delivery of cascade kit KB3B SGB E (SGB 400 E/SGB 470 E/SGB 540 E)
- 2 feeder tubes
- 2 KFE-taps ½"
- 4 adaptor flanges DN80 to DN65
- 4 shut-off valves DN80 PN6
- 2 spacer tubes SGB 470 E/SGB 540 E
- 2 flanges DN150 PN6
- 8 threaded rods M16x215
- 8 threaded rods M16x165
- 2 check valves DN80 PN6
- 2 flat gaskets DN150
- 10 flat gaskets DN80
- 4 flat gaskets DN80 EPDM
- 4 flat gaskets DN65
- 16 hexagon bolts M16x65
- 16 hexagon bolts M16x60
- 16 hexagon bolts M12x60
Cascade kit SGB 400-610 E 7307462-01 02.13