Sportana 109062 Manual Del Usuario página 7

ASSEMBLY:
Slide the handlebar steerer over the locking thread.
•
Make sure that the arrow on the fork points forward and the handlebars are bent
•
backward.
Tighten the bolts evenly and firmly using the Allen wrench provided.
•
Make sure the wheels are facing forward when the handlebars are held straight.
•
USAGE:
Firmly hold both grab handles.
•
Place one foot on the front of the deck.
•
Use the other foot to push off the ground to move the scooter forward.
•
Both feet can be on the deck when the desired speed is reached.
•
To stop, step on the brake at the rear with your foot.
•
MAINTENANCE AND CARE INSTRUCTIONS
Before each use, check the firmness of the various bolted parts, especially the wheel axles, and
the locking collar.
Always replace worn parts with original parts.
Remove any sharp fragments resulting from use.
Store the scooter in a dry and dust-free place.
DISPOSAL
At the end of your item's long service life, please dispose of the valuable raw materials properly
so that proper recycling can take place. If you are not sure how best to proceed, the local waste
disposal companies or recycling centres will be happy to help.
7 www.DEUBAXXL.de