Publicidad
Idiomas disponibles
Idiomas disponibles
MCL1614LR 1/4" & MCL1638LR 3/8" 16V Long Reach Ratchet
FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
SAVE THESE INSTRUCTIONS!
GENERAL SAFETY INFORMATION
(FOR ALL BATTERY OPERATED TOOLS)
WARNING:
Read and understand all instructions . Failure to follow
all instructions listed below, may result in electric shock,
fire, explosion and/or serious personal injury . It is the
responsibility of the owner to make sure all personnel
read this manual prior to using the device . It is also the
responsibility of the device owner to keep this manual intact
and in a convenient location for all to see and read . If the
manual or product labels are lost or not legible, contact
Matco Tools for replacements . If the operator is not fluent
in English, the product and safety instructions shall be read
and discussed with the operator in the operator's native
language by the purchaser/owner or his designee, making
sure that the operator comprehends its contents .
Work Area Safety
• Keep your work area clean and well lit . Cluttered benches
and dark areas invite accidents .
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust . Power tools create sparks which may ignite the dust
or fumes .
• Keep bystanders, children, and visitors away while
operating a power tool . Distractions can cause you to lose
control and endanger others .
Electrical Safety
• A battery operated tool with integral batteries or a
separate battery pack must be recharged only with the
specified charger for the battery . A charger that may be
suitable for one type of battery may create a risk of fire
when used with another battery .
• Use battery operated tool only with specifically designated
battery pack . Use of any other batteries may create a risk
of fire .
Personal Safety
• Stay alert, watch what you are doing, and use common
sense when operating a power tool . Do not use tool while
tired or under the influence of drugs, alcohol, or medication .
A moment of inattention while operating power tools may
result in serious personal injury .
• Dress properly . Do not wear loose clothing or jewelry .
Contain long hair . Keep your hair, clothing, and gloves away
from moving parts . Loose clothes, jewelry, or long hair can
be caught in moving parts .
• Avoid accidental starting . Be sure switch is in the locked
or "off" position before inserting battery pack . Carrying tools
with your finger on the switch or inserting the battery pack
into a tool with the switch on invites accidents .
• Remove adjusting keys or wrenches before turning the
tool on . A wrench or a key that is left attached to a rotating
part of the tool may result in personal injury .
MCL1614LR, -G, -M MCL1638LR, -G, -M
WARNING
• Repetitive motions or exposure to vibration may be
harmful to hands or arms .
• Do not overreach . Keep proper footing and balance
at all times . Proper footing and balance enable better
control of the tool in unexpected situations .
• Use safety equipment . Always wear eye protection .
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions .
Tool Use and Care
• Use clamps or another practical way to secure and
support the workpiece to a stable platform . Holding the
work by hand or against your body is unstable and may
lead to loss of control .
• Do not force tool . Use the correct tool for your
application .
• Do not use tool if switch does not turn it on or off .
A tool that cannot be controlled with the switch is
dangerous and must be repaired .
• Disconnect battery pack from tool or place the switch
in the locked or "off" position before making any
adjustments, changing accessories, or storing the tool .
Such preventive safety measures reduce the risk of
starting the tool accidentally .
• Store idle tools out of reach of children and other
untrained persons . Tools are dangerous in the hands of
untrained users .
• When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another . Shorting the
battery terminals together may cause sparks, burns, or
a fire .
• Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool's operation . If damaged, have the tool
serviced before using . Many accidents are caused by
poorly maintained tools .
• Use only impact sockets and accessories that are
recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may
create a risk of injury when used on another tool.
WARNING:
you
which is known to the State of California
to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov.
Service
• Tool service must be performed only by the
MATCO authorized service centers listed . Service or
maintenance performed by unqualified personnel may
result in a risk of injury . Repair by unqualified personnel,
use of unauthorized parts, and failure to follow
maintenance instructions may create a risk of shock or
injury .
2
This
product
can
to
chemicals
including
expose
phthalates,
07/08/20
Publicidad
