Descargar Imprimir esta página

Livoo DOM468 Manual De Instrucciones página 12

Máquina para hacer bolas de azúcar

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Technical Specifications
220-240V~ 50-60Hz 450W
Drawing of the device
Figure 1
1
Base
2
Power switch
3
Metallic cup
4
Metal stem
6
Bowl
7
Transparent lid
Assembly
Carefully unpack the cotton candy maker and remove all packaging materials. Before assembling, please
make sure that the switch is turned off and that the appliance is unplugged. Place the transparent lid (n°6
figure 1) on top of the bowl and fit them together. Position the metallic cup by fitting the metal pins together
(figure 2) and press. Attach the assembled bowl with the lid to the base of the device.
Use of the device
BEFORE USING FOR THE FIRST TIME
Before using your cotton candy maker for the first time, wipe down the main unit, the metallic cup, and
bowl with a non-abrasive cloth or sponge to clean any dust or loose materials.
Clean the bowl and the transparent lid with hot soapy water.
For optimum results, be sure to turn unit ON and allow it to run for at least 3-5 minutes before starting.
This allows the unit to properly warm up before beginning to actually spin the cotton candy. Only add
sugar to the extractor head when it has come to complete shop. Never use ingredients other than pure
granulated sugar. This will cause clogging. DO NOT overfill the sugar receptacle.
1.
Place the appliance on a flat, dry and stable surface.
2. Plug the unit and turn the power switch ON. Allow to run for at least 3-5 minutes before starting. If you
do not follow this step the unit will not preheat properly.
3. When the time is up, turn the unit off.
Wait until the cup comes to a complete stop and then add sugar to the metal cup. Use one measuring
spoon at a time. To make cotton candy, add 1 spoonful of sugar (16g).
Use only standard or specific sugar for cotton candy.
The sugar should not spill out of the cup.
4. Turn the machine back on. Never pour sugar while the machine is running.
5. The machine will rotate and heat the sugar.
6. Once the cotton candy starts to form, scoop the cotton candy with a stick. Using a quick motion, scoop
the first layer of formed sugar by twisting your stick over the metal cup. Then holding the stick
horizontally over the bowl, rotate it clockwise along the bowl. Continue twisting until the cotton candy
is formed.
7.
Once all the sugar has been used and all the cotton candy has been collected, turn off the machine.
www.livoo.fr
EN

Publicidad

loading