Accuweight AW-BS002 Manual De Instrucciones página 9

Battery Installation
NOTE:
Where required, the supplied batteries have been protected for transport
with plastic foil.
1. This scale operates on 2 "AAA" batteries (
batteries before proceeding. Always replace all batteries at the same time; do not combine
EN
old and new batteries. Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries.
2. Open the battery compartment on the bottom of the scale.
3. Place the batteries into the battery compartment as indicated by the polarity symbols marked
in the compartment.
4. Replace the battery compartment cover.
5. Replace the batteries if "Lo" appears on the display, or the readings grow dim or irregular.
Bathroom Scale Placement
WARNING:
Do not place your scale on carpet, as this will cause the readings to be inaccurate and
inconsistent.
For the most accurate readings, we strongly recommend placing your bathroom
hard, level surface. For the best results, we recommend placing the scale on surfaces such
as: ceramic tiles, hardwood, stone, or concrete.
General Weighing Operation
1. Please see "Battery Installation" section of this manual for installation instructions. Also, some
models have a static cling label on the lens to prevent scratching. Please remove before use.
2. The scale has been set at the factory to read weight in pounds (lb). You may select kilogram
(kg) or stone (st lb) (1 stone = 14 pounds) units of measurement by pressing the button on
the bottom of the scale.
3. Please place the scale on flat, hard surface. Carpeted or uneven floors may affect accuracy.
4. Step on the scale (disregarding the reading) and step off. This process insures the scale
is set and now ready for use. Do this whenever the scale is moved. At all other times step
straight onto the scale.
5. Step onto the scale platform and remain still. The display will count up to your weight. Your
weight is now displayed.
6. The scale will turn off automatically after approximately 10 seconds.
All manuals and user guides at all-guides.com
included ). Remove any plasticwrap from the
scale on a
-15-
Bottom of the scale
In Case Of Difficulty
1. Place your feet in the same position every time weigh yourself. Stand still during measurement.
2. Weigh yourself without clothing whenever possible. Clothes can vary in weight.
3. Move the scale to a location where it won't be bumped. If your scale is bumped while being
activated or while in use, an inaccurate reading may occur.
4. For the most consistent readings, weigh yourself at the same time of a day. Allow for weigh
functions due to food or during in your system.
Precautions
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap.
Never use detergents, excess water, treated cloths, harsh cleaning agent, or sprays. Do
not attempt to lubricate or open scale casing as this will void your warranty.
2. Although your scale is designed to be maintenance-free, it contains sensitive electronic
parts. Avoid rough treatment. Do not drop, kick, or jump on it. Treat it with care to ensure
the best performance.
3. Do not store scale where you store cleaning chemicals. The vapors from some household
products may affect the electronic compartment of your scale. Do not store scale on its side.
4. This scale is an extremely sensitive weighing device. In order to prevent run down of the
battery, do not store anything on the scale.
5. Do not dispose of battery in fire. Battery may explode or leak. Remove the batteries if the
scale will not be used for a long period of time.
Unit selector switch
-16-
EN