Levenhuk ERMENRICH Seek VE40 Guia Del Usuario página 4

Ermenrich Seek VE40/VE50/VE60/VE70
EN
Industrial Endoscope
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the
device only as specified in the user manual.
The kit includes: LCD digital endoscope, microUSB cable, accessories (hook, magnet, side mirror, protective cap), and user manual.
Getting started
Charging the device
This device uses a rechargeable Li-ion battery. Connect the power cable to the device and the 5V, 1A DC adapter for charging (not included) via
a USB plug and connect it to the AC power supply to charge the battery. When using the device for the first time, charge it for at least
2.5 hours.
Assembly/disassembly
•
Align and connect the display and handle connectors. To disassemble, press the button on the handle (18) to remove the display.
•
Align the cable and handle slot; then, press and connect the cable to the handle. Screw the buckle.
Installing/removing the memory card
The device supports microSD memory cards class 10 up to 64GB (not included).
•
Insert the microSD card into the slot (12). Do not force the card in.
•
To remove the card from the slot, press the edge of the memory card in gently, and the card will pop out. Then, remove the card.
Installing the accessories
Install the accessories as shown below:
Magnet
Usage
1. Insert the microSD memory card.
2. Press and hold the Power button (1) for 3 seconds to turn the device on/off. The operation status indicator lights up in blue when the device
is on.
3. Press the Camera light button (11) to adjust the camera light brightness.
4. Put the probe into the area to be inspected. The camera view will be displayed on the screen.
5. To take a picture, press the Photo/video button (5). To record a video, press and hold the Photo/video button (5). To stop recording, press
this button again.
6. To view and delete the recorded files, press the Back/File button (6).
7. To switch between the front camera and the side camera views, press the Camera switch/Confirm button (only for VE60/VE70).
8. Press the Set button (10) to enter the menu to change the settings, such as brightness, resolution, and language. Use Up (9) and Down (7)
buttons to scroll the menu. Press the Camera switch/Confirm button (8) to confirm the selection. Press the Back/File button (6) to return
to the previous menu.
Hook Mirror Protective
MicroSD
card
cap
4