Konig Computer CMP-KVMSWIT70 Manual De Uso página 3

Keyboard Hot Key Menu:
Press Scroll Lock twice, and you will hear an audible switching confi rmation tone to
ensure you are already in the Hot Key Mode (LED is blinking), then pressing either
number 1, number 2, F1, or F2 to switch from one computer to another.
Open  Close
Close  Open
PS:
Auto scan intervals: 10 seconds
In the Auto Scan mode, the KVM switch remains on one port for 10 seconds before
switching to the next. Please notice that the mouse and keyboard control will be
restricted in the Auto Scan mode.
P.S: Escape from Hot Key Mode, if you don't press any buttons after 4 or 5 seconds.
This KVM Switch will not detect whether a computer is on or off if the "Power On"
function is set in the Bios. Meaning, when you switch to the computer that is turned off,
there will be nothing displayed on the monitor.
: To Hot-Key mode.
: Switch to PC1 but Audio still with PC2. PC1 LED is
blinking.
: Switch to PC2 but Audio still with PC1. PC2 LED is
blinking.
: Switch computer and Audio to PC1 simultaneously.
PC1 LED is solid.
: Switch computer and Audio to PC2 simultaneously.
PC2 LED is solid.
or
any keys
: Close the buzzer.
: Open the buzzer.
: Reset Mouse.
: End the Hot-Key mode.
3
: To forward/backward port.
: End the auto
scan.