VTOMAN Jump 600 Manual Del Usuario página 9

4.3Jump Start Your Vehicle
JUMP600 are designed for jump starting 12V vehicle batteries，Start
current: 500A Peak current: 2000A.
Step 1: Fully plug the blue connector of the clamp cable into the jump
starter socket, and make sure the Indicator on the clamp cable is off.
Step 2: Connect Red Clamp to the negative(+) battery terminal and
Black Clamp to the negative(-) battery terminal.
Step 3: Operate according to the Indicator on the clamp cable:
GREEN LIGHT on: Telling the connection is correct and the circuit is
working,you can turn on the engine to jump startdirectly.
6