Publicidad
2. Installation
1. Place the print server in the desired location next to the printer and for which has access your
wireless network.
2. Plug in the power adapter and move the power switch to the "On" position.
3. Connect your printer to the USB port on the print server.
ON/OFF
4. Power on the printer.
5. Verify that the status LED indicators on the front of the print server to confirm that the device is
active and communicating with your printer (Power, WLAN, LINK and USB port are solid green).
6. Press and hold for 5 seconds the WPS button on your wireless router or access point.
7. Press and hold for 5 seconds the Init button on the TEW-MFP1.
8. Wait 30 seconds while the print server synchronizes with your wireless router or access point.
9. Install the Control Center Utility on each computer that requires access to the printer.
All manuals and user guides at all-guides.com
2
Publicidad
