OZKAK
Endoscope WIFI 5.5MM
ENGLISH
Please read carefully this user manual before
using this product. Failure to understand
operation procedures may result in injure. If
you get any questions, please contact us by
email: ozkak@outlook.com.
Package
1 * Charging cable
1 * hook, Magnet, Side View
1 * Endoscope
Mirror, Replacement buckle
Structure Introduction
Charging interface
Signal indicator
Power indicator
Power
Power on/off
Light control wheel
Specifications
Sensor pixels: 5 Million pixels
Resolution: HD 2560*1920
View angle: 70°
Focal distance: ≥4CM
Camera Head Diameter: 5.5mm
Photo format: MJPEG
Video format: MP4
Transmission distance: 0 ~ 10M
Light: 6 adjustable white LED lights
Waterproof level: Ip67 (lens only)
Temperature: 0 ~ 45℃
Compatible system: Android(4.1+)/iOS(7.0+)
Compatible devices: Smartphone/Tablet PC
Battery: 1800 mAh lithium battery
Working time: 1.5H
Power input: DC 5V 500 mAh/1A
How to Connect Your Devices?
1) Download APP
For android devices, download the APP "TC
WiFi" from Google Play store, or by scanning
the QR code below and install it.
For iOS devices, download the APP "TC WiFi"
from Apple APP Store, or by scanning the QR
code below and install it.
-1-
2) Power on the WIFI endoscope.
3) Search WIFI signal "TC WiFi-XXXX" (x refers
to any figure or letter) on your device, click it
to connect, no password needed.
4) Open the APP on your device, then you can
see the image.
APP User Interface
①Take Photo ②Video Recording
③Photo&Video File ④Landscape/Portrait
Switch ⑤Image Rotating ⑥Resolution Setting
⑦Battery
Charging
1, Please charge the equipment with 5v 1A
USB charger. Do not use 12v charger.
2, While charging, the red indicator light is on.
When charging is complete, the light goes out.
3, This is a built-in 1800 mAh lithium battery,
will be fully charged for about 2 hours, and
work about 1.5 hours.
Safety warning
1, Only lens and tube are water resistant, the
battery box is not. Please do not let it get wet.