Publicidad
Idiomas disponibles
Idiomas disponibles
frequencies and improving sound fidelity.
The adjustment can be performed as follows:
The feature can be accessed by the "Alignment"
menu within the config. of "Audio".
DELAY OUT1
12.0cm 0.349ms
36
Phase
This function is useful for solving frequency
cancellation issues. It is possible to invert the
phase of all outputs independently.
The feature can be accessed by the "Phase" menu
within the config. of "Audio".
PHASE
OUT1:180
Turning the ENCODER changes the phase of the
corresponding output (0º or 180º). To select
another channel, short-touch the HOTKEY key
corresponding to the channel.
Limiter
To protect your amplifiers and speakers, the
processor has a Limiter with the built-in "Dynamic
Attack-Release" system for each one of the 4
outputs. Use this function to attenuate and limit
signal peaks that are harmful to the system.
The Threshold parameter (-24 to 0dB) defines a
threshold for Limiter action. When this threshold
is exceeded, the Limiter is triggered.
The Attack parameter (0.1 to 100 ms) defines how
quickly the Limiter reacts/acts when the signal
exceeds the Threshold.
The Release parameter (1 to 1600ms) controls
the recovery time that elapses between when the
signal drops below the Threshold and when the
Limiter is deactivated.
Beyond manually adjusting the Attack and Release
values, it's possible to enable the "AUTO" mode,
in which the Attack and Release parameters are
37
Publicidad
