Descargar Imprimir esta página

Tecfrigo C 21 GSS Instalación Y Uso página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
1
. Adults should operate this appliance only. Do not allow children to use the controls or play with it. . It is
forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
4. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
5
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
6
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs. . The
manufacturers of this appliance accept no responsibility for the consequences of misuse in contravention of
these safety instructions. It further reserves the right to carry out improvements without prior notice.
8
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance near sources of
heat, such as radiators, stoves, etc.
11
. Ensure that the products displayed on the shelves and grills do not hang over the edges.
or products to be refrigerated should cause ice to form on the evaporator, we recommend stopping the
compressor and placing the goods in special refrigerated containers, kept at the same temperature, until
defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.
is indispensable to keep the door open at least 30 cm.
Important safety instructions
1. To obtain full use of the cabinet, we recommend reading this instruction manual.
2. It is the user's responsibility to operate the appliance in accordance with the instructions given.
3. Contact your dealer immediately in case of any malfunctions.
4. Place the cabinet in a dry and ventilated place.
5. Keep the cabinet away from strongly heat-emitting sources and do not expose it to direct sunlight.
6. Always keep in mind that all electrical devices are sources of potential danger.
7. Do not store inflammable material such as thinner, gasoline etc. in the cabinet.
CONNECTIONS TO MAINS
1.
Ensure that mains voltage and frequency are the same as those stated on the rating plate
to the appliance.
2.
Ensure that the supply socket has the following characteristics:
b)
It is appropriate for the nominal current as set out on the rating plate.
regulations: -Magneto-thermic differential switch with in=nominal value as stated on the rating plate; -
Differential with ID sensitivity = 30 mA.
4.
The connecting cable to the appliance is H05 VVF, designed for internal use only.
appliance, during the transport or storage, has been erroneously placed in horizontal position or upside-
down, it must be left in the correct vertical position for at least 3 hours before connecting it to the electrical
supply.
5.
Insert the plug (do not use triple and reductions outlets)
Start-up of the cabinet
Before use, we recommend that the cabinet is cleaned, see the section on maintenance and cleaning.
Important !
If the cabinet has been vertically placed during transport, please wait 3 hours before starting up the
cabinet.
Thermostat
The appliance features adjusting controls, protected on the front side.
3 "SET or P"
Press button
4 "UP"
button
or button
Press the
SET
button to exit the adjustment and display the internal temperature
English
10
. Keep the ventilation grills free from obstruction for at least 30 cm.
3.
Ensure that there is no danger of explosion (AD) in the room.
once to display the temperature set-point, which can be changed by press
5 "DOWN".
9
13
. If the appliance is not working and unused, it
c)
4
3
12
. If damp air
(A)
attached
a) It is properly earthed.
It complies with the IEC
Notice:
in case of
2
7

Publicidad

loading