Publicidad
6
Consejos de seguridad y uso:
7
Reciclado del producto:
MATERIAL
DEPOSITAR EN:
CONTENEDOR
PLÁSTICO
AMARILLO
CONTENEDOR
PAPEL Y
AZUL
CARTÓN
NOTA: El color de los contenedores puede variar en función del pais donde se aplique. Consulte la normativa local al respecto.
Instructions for use and safety
1
General view:
2
Normative: -Follow these instructions to comply with the R.D. 842/2002, directive 2014/35/UE (DBT) and EN 60670-1 &22.
- Installation, service and maintenance of the electrical equipment may be carried out by anauthorized person only.
3
General characteristics: Box for connection and derivation with ventilation holes; For embedded installation
in brick walls; With frame and folding door for easy opening; The door has ventilation holes that allow the
internal temperature produced by active elements, home automation, etc. to dissipate. Wide interior space to
make all kinds of connections; Possibility of putting up to three DIN rails for fixing modular and home
automation elements; (Ref. GU6888); Possibility of placing up to three mounting plates (Ref. PL-MP28) at
the bottom, for fixing all kinds of elements (connection strips, shunts, power supplies, etc...); Possibility of
fixing connection strips in the upper and lower part for derivation of neutral, phase and earth (Ref. 212N,
212TT); Possibility of serving with metal key lock; Horizontally and vertically linkable; Ultra-fast locking
screw; Completely removable sides to facilitate the entry of multiple tubes (up to Ø 60 max.); Dimensions:
360 x 528 x 86mm (W x H x D); thermoplastic material; White color.
4
Components: 1.- Box.2.- Frame. 3.- Reversible door. 4.- Anti-deformation partition. 5.- Closure screws. 6.-
Union boxes. 7.- Metallic DIN profile (*accessory not included). 8.- Mounting plate (*accessory not included).
9.- Connection strip (*accessory not included).
Assembly: 5-1 Box assembly. A- Open a hole, place a box with the "4-anti-deformation partition" inside and
5
falcar; B- Remove partition (4), and assemble frame to box with "5-closing screws"; C- Assemble door. Box
background.
5-2 Link boxes. A- Place "6.- Union boxes" sliding them into the "accommodations for vertical union (a)" or
"horizontal (b)", as indicated in the diagram. B- Assemble the boxes as indicated in the previous point (5-1
Box assembly).
5-3 Assembly "7.- Metallic DIN profile" (accessory). GU6888. - Assemble the Profiles (7) with their 4 screws,
in the 3 possible positions. Screw position. Position profiles.
5-4 Assembly "8.- Mounting plate" (accessory). Ref. PL-MP28. - Assemble the Plates (8) with their 2 screws
in the 3 possible positions. Screw position. Plates position.
5-5 Assembly "9.- Connection strip" (accessory). Ref. 212N, 212TT. A- Assemble the strip (9) in its housing
(a). B- Slide to the bottom. Rules position.
6
Safety and usage tips.
7
Product recycling: PACKAGING WASTE; MATERIAL; PLASTIC; PAPER AND PAPERBOARD; DEPOSIT IN: (NOTE); LOGO
IN SPAIN; INTERNATIONAL LOGO (NOTE); LOGO IN FRANCE; PRODUCT WASTE; WASTE; NO WEEE; DEPOSIT IN:
RESIDUOS DE ENVASE
LOGOTIPO EN
LOGOTIPO
ESPAÑA
INTERNACIONAL
RESIDUOS DE PRODUCTOS
LOGOTIPO EN
RESIDUOS
FRANCIA
NO RAEE
-4-
DEPOSITAR EN:
LOGOTIPO
ECOPARQUE
MUNICIPAL
ENGLISH
Publicidad
