TFA 38.2025 Instrucciones De Uso página 11

TFA_No. 38.2025_Anleit_06_23
Digital dual timer
• Place the battery compartment lid on the housing and slide it upwards.
• All LCD segments will light up for about a few seconds
• The unit is ready for use.
• Take out the batteries to shut down the instrument.
7. Operation
7.1 Timer
• Set the time for timer 1.
• Press T 1 button.
• T 1 appears on the upper display.
• Push the HR button to set the hours, the MIN button to set the minutes and the SEC
button to set the seconds of the desired time. Press and hold the buttons in setting
mode for fast running.
• ▼ appears on the display.
• Push the S/S button to start the countdown process.
• During the countdown, the symbol is flashing and the T 1 button flashes in green.
• Use the S/S button to stop and restart the counting.
• After the countdown the symbol ▲ appears in the display, the alarm (60 seconds) will
sound and the T 1 button flashes in red. Now the timer will start to count up the
elapsed time.
20
05.06.2023 9:57 Uhr Seite 11
Digital dual timer
• Press the S/S button to stop the counting and to deactivate the alarm sound.
• The timer will recall the last selected time automatically.
• Push the HR and MIN button at the same time to reset the timer.
• Set the time for the timer 2 in the same way.
7.2 Memory function
• Press T1 or T2 to select a timer.
• Press and hold M button for 2 seconds.
• 0:00 flashes on the display.
• Push the HR button to set the hours, the MIN button to set the minutes and the SEC
button to set the seconds of the desired time.
• Confirm the setting with the M button.
• Press M button to recall the preset time.
• Push the HR and MIN button at the same time to reset the timer.
7.3 Stopwatch
• Press T1 or T2 to select a timer.
• Push the HR and MIN button at the same time to reset the timer.
• Push the S/S button to start the count up-process. ▲ appears in the display.
• Use the S/S button to stop and restart the counting.
21