Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning:
a)
Never use high water pressure to wash the scooter. Soaked electrical parts and wiring will affect the
performance.
b) Never apply lubricant to the drum brake and the tire.
c)
Use lubricant to clean the metal parts of the scooter.
d) Use cleaning agent to clean the painting plastic parts surface and wipe up by cloth.
Brake inspection:
Front and rear hub brake main checking points:
1. Press the connecting link (1), screw the adjustable nut (3), at the same time holding the brake handle (2) and lead
the brake lever achieved braking distance at 1/3-1/2,. Let the rear brake shoes attached well to the brake tray.
Press the brake levers and when it reached the braking efficiency, tighten the adjustable nut.
2. The best distance for brake shoes and hub tray is 1.5mm.
3. Replace brake shoes when the usage surface has reached 1/2.
Charger inspection:
1. Use only special or original charger. Difference country may use difference charger. Do not mess-up 220V and
110V charger.
16
Publicidad
