Atlanta BYK byko-spectra mini Instrucciones De Uso página 16

Maintenance of the byko-spectra mini
Fluorescent Lamp End Blackening
Disposal
16
lamps and reversing them end-to-end so that the
pins go into the opposite sockets.
Extended, or chronic flickering can also be a
result of the light booth being connected to an
ungrounded outlet or to a „noisy" electrical circuit,
e.g. a circuit with a photocopier or other device
with high power requirements connected to it. To
eliminate these causes of flicker, make certain
that your light booth is connected or wired to a
properly grounded outlet or reconnect the light
booth to another circuit which is known not to
have high-powered devices on it.
Ignition filament deposit during operation can
cause lamp blackening(banding, spots) at the
ends. This is a normal condition and will not affect
the light quality or operational performance of your
light booth.
All fluorescent lamps contain small amounts
of mercury. Please dispose of lamps properly
according to Federal, State, and Local regulations.