Sylvania LC370SS8 M Manual Del Usuario página 23

Manual Register
The manual register function lets you add the channels that were not added
by the auto channel scan due to the reception condition at the initial setting.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Manual Register", then
press [ENTER].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
5
Press [SETUP] to exit.
Note:
• If set up completes successfully, "Registered to the Channel
List" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
All manuals and user guides at all-guides.com
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
11
Manual Register Manual Register
Register
For analog channels,
select a channel to register using
number keys.
For digital channels,
you must perform Autoscan function.
BACK
Ch Change Back
Antenna Confirmation
This function lets you check the signal strength of each channel.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Antenna", then press
[ENTER].
4
Use [the Number buttons] or [CH K / L] to select the
channel for which you want to check the signal strength.
• If the channel is set to external input, you cannot
confirm the antenna condition.
5
Press [SETUP] to exit.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
11
Antenna
Antenna
Back
Now 0 Peak 0
Ch Change
CH
Video1
Antenna Antenna
Back
Indicator is available
for antenna signal only.
Ch Change
CH
23
EN