Publicidad
Idiomas disponibles
Idiomas disponibles
Chronograph Function
1.Press Button B once to enter into stopwatch mode, 0:00 will appear on the digital
sub-dial.
2.Press button C to start/stop counting and press button D to reset value to zero.
3.Press button B to return to standard time display
Alarm Setting
1.Press button B twice to enter into alarm mode and value will flicker on the digital
sub-dial.
2.Press button D to adjust hour.
3.Press button C to switch to minute setting, then press button D to adjust minute.
4.Press button B to return to standard time display
5.Turn off Alarm: Standard time display, press the C and the D (the 2 buttons on the
right side of the case) at the same time.
Time Setting on Digital Sub-Dial
1.Press button B three times to enter time setting mode, second value will flicker.
2.Press button C to switch to minute setting, then press button D to adjust minute.
3.Press button C to switch to hour setting, then press button D to adjust hour.
4.Press button B to return to standard time display
5.Turn off Hourly Chime and Sound Reminders: Standard time display, press the B
(the button on the left under the case) and the C (the button on the right below the
case) at the same time. When you press it, if there is a week, it indicates that the
reminder is turned on, otherwise it indicates it is turned off.
6.Adjust 12-Hour or 24-Hour Mode: Standard time display, press button B three
times to enter time setting mode, second value will flicker. Press button C two times
to switch to hour setting, then press button D to adjust hour. If 1:00 AM is displayed
at this time, you can switch to PM by pressing 11 times, and there will be no AM/PM
after pressing 12 times, which means that it is already in 24-hour mode.
4
Publicidad
