Use Of The 230V Ac Out; Thermal Overload Protection - GENERGY VULCANO Instrucciones De Uso

6.1 Use of the 230V AC outlet.
NOTE: Check that no devices are plugged into the generator, unplug
everything before starting the engine.
Start the engine following the steps indicated in this manual.
On TEIDE TIMANFAYA models, please place the mode switch in GENERATOR
position (right), please, check image below.
Once started, verify that the overload protection (BREAKER) is in the "ON"
position, now you can connect your devices.
WARNING: The welding function and 230V outlet cannot be used
simultaneously.
In order to improve the engine operation and extend the life of the machine, we
recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output.
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
If an electrical device is not working properly, is slow or stops suddenly, turn off
the engine immediately and unplug the device.

THERMAL OVERLOAD PROTECTION

230V DC OUTPUT
22