Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CORDLESS ELECTRIC SAW WITH 14.4V LITHIUM BATTERY
GENERAL SAFETY PRECAUTIONS
- WARNING:
Before using this tool or any of its
accessories, read this manual and follow all safety
and operating instructions.
EYE, EAR AND RESPIRATORY PROTECTION
-
ALWAYS USE EYE PROTECTION,
cause serious eye injuries. Use always wear high
quality goggles.
- ALWAYS WEAR HEARING PROTECTION
especially during prolonged periods of tool operation
or if the operation is very noisy.
- ALWAYS USE RESPIRATORY PROTECTION
to avoid breathing dust and shavings
from the insulation.
WARNING:
Always use quality protective equipment.
ELECTRICAL SAFETY
To avoid electrical hazards, fire hazards or damage to the tool, use
proper circuit protection.
COMPATIBLE MATERIALS
The COLOTOOL CORDLESS ELECTRIC SAW is specially designed
for cutting mineral insulation rolls or boards such as rock wool, sheep
wool, cellulose, glass wool. Do not cut any other material such as
wood, metal or plastic to avoid damage to the tool and prevent the user
from serious injury.
POWER TOOL SAFETY
- WARNING:
Read all warnings and safet instructions.
Failure to comply with the warnings and instructions
may result in electric shock, fire and/or electrical
shock, fire and/or serious injury.
SAFETY IN THE WORKPLACE
Keep the work area clear. Do not use power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite dust or fumes. Keep
children away while operating a power tool. Distractions can cause the
user to lose control of the tool.
ELECTRICAL SAFETY
Do not expose power tools to rain or wet conditions. The presence of
water inside the tool will increase the risk of electric shock.
PERSONAL SECURITY
Maintain concentration while operating the tool, watch what you are doing
and use common sense when operating a power tool.
Do not operate a power tool while you are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious
personal injury. Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust masks, non-skid safety shoes, hard
hat, or hearing protection used under proper conditions will reduce
personal injury.
Dress appropriately. Do not wear loose clothing or jewellery. Keep hair,
clothing and gloves away from moving parts.
USE AND CARE OF THE POWER TOOL
Disconnect the battery pack from the power tool before making any
adjustments, changing accessories or storing power tools. These
preventive safety measures reduce the risk of starting the power tool
accidentally. Store power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
inexperienced users. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation.
shavings can
USE AND CARE OF THE BATTERY
Recharge the battery only with the included charger. Use power tools
only with specifically designated batteries. When battery is not in use,
keep it away from other metal objects. Short-circuiting the battery
terminals may cause burns or fire. Battery may leak liquid under
abusive conditions, avoid contact. In case of accidental contact, flush
with water. If liquid comes in contact with eyes, seek medical attention.
Liquid ejected from the battery may cause irritation or burns.
BATTERY AND CHARGER SAFETY
Never attempt to open the battery for any reason. If the battery casing is
damaged or broken, discontinue use immediately and do not recharge the
battery. Do not charge the battery if it is wet or shows any evidence of
corrosion. Under no circumstances should the battery be incinerated as it
may explode.
Do not use an extension cable. Connect the charger cable directly to a
standard 230V/50Hz power socket. Do not use the charger in damp or wet
conditions. Do not immerse the charger in water. The charger should be
placed away from sinks and hot surfaces. Do not use the charger to charge
batteries other than those in the oscillating tool. Other batteries may explode.
Do not use the charger if the cord or plug is damaged. Do not charge the
batteries when the working area or battery temperature is below 0 °C or
above 45 °C. Unplug the charger when not in use.
PARTS OF THE ELECTRIC SAW
Stationary shoe
Variable speed button
Battery release button
Battery
- WARNING:
Use only the charger supplied with this tool
to charge the 14.4V lithium-ion battery. Charging other
batteries may damage the charger.
Ref. 25052
Air outlet
Lock-off button
Publicidad
