Publicidad
Idiomas disponibles
Idiomas disponibles
Non Power-Assisted Mode
1
Charge Percentage
4
Battery Level
7
Bluetooth Connection Status
10
Charging
Before using it for the first time, please
use the provided power adapter to charge
the pedelec and activate the battery.
If the battery power is too low, the battery
will sleep. Please charge it for a while and
then turn it on again.
Tip: If the battery power is less than 50% and the bicycle is not used for 7
days, the battery will enter the sleep mode. You need to connect the power
adapter to activate it.
The display screen shows the percentage
of battery power while charging (in
power-on state)
Power on
Press and hold the red power button on
the left side of the handle bar to turn on
the power. If there is no operation within
10 minutes, it will automatically shut
down.
Power off
Press and hold the red power button
on the left side of the handle bar in the
power-on state to turn off the power.
When the power is turned off, you can
ride the pedelec without electricity.
Power-Assisted Mode
2
Light
5
Abnormal Temperature Indication
8
Speed Unit
11
Digital Meter
3
Charging
6
System Error
9
Walk Assist Mode
12
Connect the
Press and hold the red power
button: power on/off
Press and hold the red power
button in the power-on state: power off
adapter
5
Publicidad
