7. TECHNICAL SPECIFICATIONS
R.M.S. Output power
I.H.F. Output power
Total harmonic distortion
Bandwidt
Signal - noise ratio
Inputs
Input sensitivities
Speaker line output
Controls
Mains supply
Battery supply
Empty consumption
Full load consumption
Fan activation temperature
Overheating protection
Dimensions (mm)
Rack units
Weight
Finishes
UP-366, UP-246, UP-126 and UP-66 Version 1.1
AMPLIFIERS UP-366, UP-246, UP-126 and UP-66
UP-66
UP-126
60 W
120 W
82 W
162 W
< 0.5 % (1 kHz)
< 0.5 % (1 kHz)
1 program (0 dBu), 1 priority (0 dBu)
16 VA
138 VA
253 VA
-
Front fan:100º C*
95º C
8.6 kg
10 kg
Iron front panel blue painted. Iron cover black painted
(*) With respect to its size, the unit has been designed not to require the
ventilator except in extreme conditions.
UP-246
240 W
312 W
< 0.5 % (1 kHz)
50 ~ 18.000 Hz (±3 dB)
> 80 dB
775 mV (program and priority)
100 V, 70 V, 50 V / 4, 8, 16 ohms
Program and priority volume
230 V.c.a.
24 V.c.c.
7,5 VA
9.2 VA
460 VA
Front fan: 65º C
Rear fan: 100º C*
110º C
482.6 (w) x 88.8 (h) x 368.5 (d)
2
13.6 kg
E N G L I S H
UP-366
360 W
482 W
< 0.65 % (1 kHz)
Eng
16 VA
736 VA
Front fan: 65º C
Rear fan: 100º C*
15.7 kg
2 1