Lincar NADA 140A Manual Del Usuario página 24

COLLAR EXHAUST FUMES ASSEMBLY
The equipment is provided by collar exhaust fumes for a vertical connection.
Vertical exhaust fumes collar
Place the collar over the plate and fix it to the plate
•
employing the enclosed screws. Be careful to
employ the screws in the right way.
HANDRAIL ASSEMBLING
 To insert the caps "D" on terminals
support "C".
 To insert the support "C" in tube "A"
than fix it to the plate frame with
screws "F" interposing the connection
ring "B".
FUME VALVE ASSEMBLY
Withdraw from the accessories envelope the fumes
•
valve and the fumes valve lever.
Remove the radiant plate with the rings, in this way
•
you will have access to the area to mount the valve.
Insert the valve by switching to the support slit.
•
Move the valve to lock and then insert the valve
•
lever from the top of the plate.
Be careful to position the lever at 12 o'clock.
•
Replace the plate with an anges in its seat.
•
IT IT IT IT- - - - EN
Valve Fumes Lever
Valve Fumes
24/76
EN- - - - FR FR- - - - E E E E S S S S mod. NADA 140A EN13240
EN EN FR FR
Exhaust fumes collar