Airzone Aidoo Pro Manual De Instrucciones página 9

Operation of the device
FUNCTIONALITIES
Operation modes
The connected Airzone device will simulate the manufacturer's own LAN device, acting
as a slave. The manufacturer's units can operate in both room temperature mode (TH) and
in water supply temperature mode (LWT), but can never be configured as external room
thermostat (external TH).
The Aidoo device can regulate the temperature in a circuit, both in TH mode and in LWT
mode.
DHW control
The manufacturer's units allow you to manage domestic hot water (DHW) production status
control.
The "Powerful" function can be activated in DHW production status control, which forces the
DHW to reach a temperature that has been preset in the configuration of the unit. If DHW is
turned off, it will not be possible to activate this parameter.
Status modes
The unit status can be selected from the Airzone device, enabling on/off control of both the
room thermostat and the DHW.
The selectable status mode values are Cooling mode, Heating mode and Auto mode. If the
unit is operating in Auto mode, its operation will depend on the outdoor temperature and the
thermostat room temperature.
Set-point temperature
The unit temperature will depend on the operation mode:
•
In TH mode, the thermostat room temperature will be selected, and in LWT mode, the water
supply temperature at which the unit is to operate will be selected.
•
The DHW temperature can be selected within the ranges set by the unit's own main
thermostat.
The temperature limits can be selected from the unit's main thermostat, both for TH mode
and for LWT mode. The maximum DHW temperature value can be selected, but the minimum
value cannot be configured.
EN
9