ASSEMBLY
Cruise models can be fixed to the lodgings by means of the Easy Fix system.
This system involves four special pre-drilled points inside a trunk, for easy and effective installation that is not visible from
the outside (Fig. 1).
With Easy Fix, you can install Cruise units with the door flush to the furniture without using a special mounting flange. For this
installation, you must leave 10 mm of space between the refrigerator and the furniture unit at least for the entire thickness of
the door, thus ensuring its free movement.
Fig. 1
EN
It is very important for the refrigerating unit, consisting of the compressor and the condenser, to be well ventilated, with the
cool air coming in from the bottom and going out from the top.
You must ensure proper ventilation of the refrigerating unit.
The air inlets and outlets must have a free cross section of at least 200 cm2 (see ventilation diagrams in Fig. 2-3).
Fig. 2
Fig. 3
21
OFF IS A BRAND OF INDELB