- Remove the cover (1) of the wastewater container (2) as
follows:
- release the catch (b) by applying downward pressure in the
direction of the container (Fig. 3)
- press down the catch (a) while simultaneously lifting the cover
(1). Fig. 3
Filter function
Fill the container (2) with tap water up to the MIN level mark
(Fig. 4); put the cover back on and engage the two catches
a+b (catch "b" should be engaged in the body).
Filling the container with water, will ensure that the air is filtered
and any impurities (dust, mites, etc.) are trapped.
- Introduce the plug of the power cable (10) into the electrical
socket.
CONNECTING AND USING
THE ACCESSORIES
The accessories can be connected directly to the handle of
the work hose (d) or to the extension tubes (a), when so
required. To connect the different accessories to the hose or
tubes, simply introduce and push the male end of one into the
female end of the other. Fig. 5
Failure to secure the accessories using the clasp provided can
pose a hazard; the accessories can suddenly come off while
the machine is in operation.
All the following functions can be used with any one of the
accessories provided:
- steam function;
- vacuuming function;
- simultaneous vacuuming and steam functions;
a
Fig. 3
Fig. 4
Fig. 5
23
b
1
2
M I N