Publicidad
Idiomas disponibles
Idiomas disponibles
The remote control does not work.
• Check if the remote control sensor at the bottom of the TV
blinks when you press the
– When the remote's battery is discharged, charge the
battery using the USB charging port (C-type), or turn over
the remote to expose the solar cell to light.
• Try pointing the remote directly at the TV from 1.5-1.8 m away.
• If your TV came with a Samsung Smart Remote (Bluetooth
Remote), make sure to pair the remote to the TV. To pair
a Samsung Smart Remote, press the
together for 3 seconds.
Eco Sensor and screen brightness
Eco Sensor adjusts the brightness of the TV automatically. This
feature measures the light in your room and optimises the
brightness of the TV automatically to reduce power consumption.
If you want to turn this off, go to
> All Settings > General & Privacy > Power and Energy Saving >
Brightness Optimisation.
• The eco sensor is located at the bottom of the TV. Do not
block the sensor with any object. This can decrease picture
brightness.
Changing the TV's password
>
Menu >
Settings > All Settings > General & Privacy >
System Manager > Change PIN
Run Change PIN and then enter the current password in the
password field. The default password is "0000" (France: "1111").
Enter a new password and then enter it again to confirm it. The
password change is complete.
If you forgot your PIN code, press the buttons in the following
sequence to reset the PIN to "0000" (France: "1111"):
• On the Samsung Smart Remote: Press
button. > Volume Up >
> Volume Down >
>
.
button on the remote control.
and
buttons
>
Menu >
Settings
(Volume)
> Volume Up
05 Specifications and Other
Information
Specifications
Display Resolution
1920 x 1080
Sound (Output)
20 W
Operating Temperature
10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
10 % to 80 %, non-condensing
Storage Temperature
-20 °C to 45 °C (-4 °F to 113 °F)
Storage Humidity
5 % to 95 %, non-condensing
Notes
• This device is a Class B digital apparatus.
• For information about the power supply, and more information
about power consumption, refer to the information on the
label attached to the product.
– On most models, the label is attached to the back of the TV.
(On some models, the label is inside the cover terminal.)
– On One Connect Box models, the label is attached to the
bottom of the One Connect Box.
• Typical power consumption is measured according to IEC
62087.
• The images and specifications of the Unpacking and
Installation Guide may differ from the actual product.
English - 7
Publicidad
