Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
IB51944622
Installation Instructions – UHBS BY240Z Sensor Remote Control
Instructions d'installation - Télécommande à capteur UHBS BY240Z
Instrucciones de instalación – Control remoto del sensor UHBS BY240Z
Catalog #
UHBS SENSOR REMOTE
Dimensions
Button Operation
Button
Description
Press the
button, the light goes
ON/
OFF
to permanent on or permanent off
ON/
mode, and the sensor is disabled.
OFF
(MUST press
AUTO
mode.
The
button is for testing sensitivity
TEST
2s
only. After you choose sensitivity
thresholds, then you press
TEST
the sensor goes to test mode (hold time
2s
is only 2s) automatically, the stand-by
period and daylight sensor are disabled.
Press
button to quit from this mode.
AUTO
Confirm selected parameters on
OK
remote control.
Press
button, upload the current
SEND
parameters to sensor(s), the LED light
SEND
which the sensor connects will on/off
as confirm.
Power
0.1W
2-3/4"
70mm
Button
AUTO
button to exit this
button,
TEST
2s
MODE1 MODE2
MODE3 MODE4
Upload Range
Up to 15m (50ft.)
27/32"
21.3mm
Description
Press
button. Sensor
AUTO
starts working and all
settings remain the same
as latest status before the
light was switched on/off.
Enter in the setting
condition, the parameter
LED of remote control
will flash to be selected.
Navigate to UP and Down
for choose selected
parameters in LED
indicators.
4 Scene modes with preset
parameters which are
available to be changed and
saved in modes.
Metalux
Op. Temperature
0
C~50
o
REMOTE
With carrying case
Power supply
2xAAA 1.5V battery,
Alkaline perferred
Button
Description
Displays current settings of sensor.
Each button's LED indicator light will
DISP
turn on to show which parameters are
active.
To reset sensor to factory setting,
RESET
press
button.
RESET
Navigate LEFT or RIGHT to choose
LED parameters using each button's
indicator lights.
Open and close smart daylight
sensor, press
or
setting condition, the parameter leds
of remote control will flash to be
selected, press
for open or close
smart daylight sensor.
C
o
to enter
Publicidad
Resumen de contenidos para Metalux UHBS BY240Z
- Página 1 Metalux IB51944622 Installation Instructions – UHBS BY240Z Sensor Remote Control Instructions d’installation - Télécommande à capteur UHBS BY240Z Instrucciones de instalación – Control remoto del sensor UHBS BY240Z Catalog # Power Upload Range Op. Temperature UHBS SENSOR REMOTE 0.1W Up to 15m (50ft.)
- Página 2 Installation Instructions – UHBS BY240Z Sensor Remote LED Indicators Description Description Description Select the current surrounding lux value as Sets the output level the daylight threshold. This Sets the occupancy sensitivity of BRIGHTNESS of the luminaire during SENSITIVITY feature enables the fixture the Sensor occupancy.
- Página 3 Installation Instructions – UHBS BY240Z Sensor Remote Daylight Function Configuration Press , the remote LED indicators will show the latest parameters. DISP Press to enter setting condition, the parameter LED indicators of remote control will flash to be selected. Press...
- Página 4 Instructions d’installation - Télécommande à capteur UHBS BY240Z No de catalogue Alimentation Plage de téléchargement Op. Température : TÉLÉCOMMANDE À 0,1W Jusqu’à 15 m (50 pi) C~50 CAPTEUR UHBS 27/32" Dimensions 2-3/4" 21,3 mm 70 mm TÉLÉCOMMANDE Avec étui de transport Alimentation électrique...
- Página 5 Instructions d’installation - Télécommande à capteur UHBS BY240Z Témoins DEL : Description Description Description Pour sélectionner la valeur de lux environnante Fonction de rotation de la actuelle comme seuil garniture haut de gamme de lumière du jour. Cette Pour régler la sensibilité de (pour régler le niveau...
- Página 6 Instructions d’installation - Télécommande à capteur UHBS BY240Z Configuration de la fonction lumière du jour Appuyez sur , les indicateurs DEL de la télécommande affichent les derniers paramètres. DISP 2. Appuyez sur entrez dans la condition de réglage, les indicateurs DEL du paramètre de la télécommande clignoteront pour être sélectionnés.
- Página 7 Instrucciones de instalación – Control remoto del sensor UHBS BY240Z Catálogo n.º Alimentación Rango de transmisión Temperatura operativa SENSOR REMOTO UHBS 0,1 W Hasta 15 m (50 pies) 0 C~50 Dimensiones 27/32" 2-3/4" 21,3 mm 70 mm REMOTO Con estuche portátil Fuente de alimentación 2 baterías AA de 1,5 V,...
- Página 8 Instrucciones de instalación – Control remoto del sensor UHBS BY240Z Indicadores LED Descripción Descripción Descripción Para seleccionar el valor de lux circundante actual Función de nivel de luz como el umbral de luz máxima (para configurar Para configurar la sensibilidad diurna.
- Página 9 Instrucciones de instalación – Control remoto del sensor UHBS BY240Z Configuración de la función de luz diurna Presione , los indicadores LED del control remoto mostrarán los últimos parámetros. DISP 2.Presione para ingresar en la condición de configuración, los indicadores LED del parámetro del control remoto parpadearán para seleccionarlos.
- Página 10 FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.