Vertilux VTi RE-LION CELTIC Manual De Programación página 6

3. Press the UP/DOWN
4. Press the RIGHT
ash once you press the RIGHT button on this step.
or
UP /DOWN
5. Press the UP/DOWN
or
UP /DOWN
6. Press the RIGHT
Finish and Exit the Timer setup
PG:01 will be shown. If you want to set an additional program, press the UP button to move to PG:02
and follow steps 1-6. If you wish to exit the program mode and save the con guration, press and
hold the T button until the screen shows "OK".
Turn on the Time mode once the timer set up is nished. To check your timer settings make sure:
buttons to scroll through the minutes until you are on the desired ones.
button to set the opening position. The arrow that indicates the DOWN position will
buttons to scroll through up to the desired opening percentage value.
20% 50%
button to set a new timer program and follow the step below.
Shades paired on the Channels 1
and 2 are going down at 10:15PM
from Monday to Friday.
100%
Shades paired on the channels 1
and 2 are going DOWN to the
bottom limit position at 10:15PM
from Monday to Friday.