TFA 60.2528 Instrucciones De Uso página 15

TFA_No. 60.2528_Anleitung
BINGO - Radio-controlled alarm clock
7.1.2 Setting of the day-of-week language
• Adjust the desired day-of-week language with the – or + but-
ton: German (D), English (EN), French (FR), Spanish (ES), Italian
(IT) or Dutch (NL).
• Confirm the setting with the SET button.
7.1.3 Setting of the button tone
• Normally the button tone (beep) is disabled (OFF).
• Press the – or + button to activate the button tone (ON).
• Confirm the setting with the SET button.
8. Alarm
• The alarm clock has two alarms with different alarm tones.
8.1 Setting of the first alarm time
• Press the SET 1 button in normal mode.
• 7:00 (default) or the last adjusted alarm time appears on the
display.
• The hour digits will be flashing .
• Press – or + button to adjust the hours.
• Confirm the setting with the SET 1 button.
• The minute digit will be flashing. Press the – or + button to
adjust the minutes.
28
31.03.2014 09:55 Uhr Seite 15
BINGO - Radio-controlled alarm clock
• Confirm the setting with the button SET 1.
• The adjusted alarm time appears on the display.
• To activate the alarm function, move the switch AL 1 ON/OFF
upwards (ON). At the same time, the color mark appears and
on the display appears a frame with the alarm symbol
• The first alarm time is activated.
• When the adjusted alarm time is reached, the alarm will ring.
• The alarm symbol will be flashing and the backlight will be
activated for 5 seconds.
• Press any button and the alarm will stop.
• If the alarm is not stopped manually, the increasing alarm will
automatically turn off after certain minutes.
• The alarm symbol rests on the display and the alarm time will
be reactivated at the same time.
• When the alarm rings, press the SNOOZE/LIGHT button and
the snooze function will be activated.
• Once the snooze function is activated, zZ will be flashing on
the display.
• The alarm will be interrupted for 5 minutes.
• Slide the AL 1 ON/OFF switch downwards (OFF) to deactivate
the alarm function.
• The alarm symbol and the color mark disappear on the display.
.
29