Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Installing LP Gas Tank
To operate,you will need one precision-filled standard grill LP gas tank with external
valve threads.
CAUTION: LP gas tank must be properly disconnected and removed
prior to moving this outdoor firepit.
Inserting LP Gas Tank
WARNING: Make sure LP gas tank valve is closed.
1. Loosen LP gas tank retainer bolt by turning counter-clockwise.
2. Place precision-filled LP gas tank upright into hole in outdoor firepit
base so the tank valve is facing the gas line connection.
3. Secure tank by turning LP gas tank retainer bolt clockwise until tight.
Step 1
Connecting LP Gas Tank
1.
Before connecting be sure there is no debris caught in the head of the LP gas tank
.
head of the regulator valve or in the head of the burner or burner ports.
2. Connect regulator/hose assembly to tank by turning knob clockwise until it stops.
Disconnecting LP Gas Tank
1.
Before disconnecting make sure the LP gas tank valve is "CLOSED".
.
2. Disconnect regulator/hose assembly from LP gas tank by turning knob counterclockwise
until it is loose.
CAUTION: LP gas tank must be
prior to moving this firepit .
3. Place the protective cap cover on the LP tank and store the
tank outdoors in a well ventilated area out of direct sunlight.
.
properly
disconnected and removed
.
11
20 lb
9 Kg
12.2 in. / 31 cm
Publicidad
