Publicidad
Idiomas disponibles
Idiomas disponibles
* Note: The right compartment is on the side where the compressor is.
• Power supply: Connect to DC 12V/24V, AC 100-240V(using the adapter) or solar (12-SOV)
power supply.
• Display Screen: When the fridge is powered on, the buzzer will make a long sound, the
display will show for two seconds and the fridge will enter standby.
• Power On/Off: Press
• Temperature Setting: When on, hold
switch on/off the left compartment. Hold
switch on/off the right compartment. Two compartments cannot be switched off at the same
time.
When both compartments are running, press
compartment. Press
Press
to switch to the other compartment. The setting will be saved automatically.
Note:The current temperature of the compartment is what will be displayed. It will take a while
to reach the set temperature.
Temperature range: -20-20°C(-4-68°F)
• Cooling Mode: When on, press
(Energy saving mode). Factory setting is MAX.
• Battery Protection Mode: When on, hold
Then press0again to select the protection mode H (High), M (Medium)or L (Low). Factory
setting is H.
Voltage Reference:
* The voltage is theoretical and could vary in different scenarios.
* H should be set when the product is connected to the car power. M or L should be set
when connected to a portable or backup battery.
to switch on and hold
and
to increase the temperature and press
to switch to MAX (fast cooling) or ECO
for three seconds to switch off.
at the same time for three seconds to
and
at the same time for three seconds to
or
to set the temperature for the left
for three seconds until the screen flashes.
to decrease.
Publicidad
