Home Decorators Collection HD0547D Guía De Uso Y Mantenimiento página 5

Installation
1
Preparing the shade assembly
□
Unscrew the mounting balls (1) from the fixture body (A).
□
Remove the shade assembly (2) from the fixture body (A) and
keep the shade assembly (2) and mounting balls (1) for later
use.
3
Making the electrical connections
□
Ground Wire:
□
Connect the fixture ground wire to the supply ground wire with a wire connector (BB).
□
Supply Wire:
□
Connect the supply white wire to the white fixture supply wire with a wire connector (BB).
□
Connect the supply black (or red) wire to the black fixture supply wire with a wire connector (BB).
□
Wrap each connection with approved electrical tape and carefully insert all of the connected wires into the outlet box.
2
A
1
2
Preparing the fixture body
□
Carefully fit the post fitter of the fixture body (A) over
the end of the post (not supplied), making sure the post
fitter is fully seated.
□
Mark the drill point for the 3 mounting screws (AA)
using 3 mounting holes as reference.
□
After marking hole locations, remove fixture from post
and drill 1/16 in. pilot holes for screws.
BB
5
Please contact 1-800-986-3460 for further assistance.
A
Post
HOMEDEPOT.COM/HOMEDECORATORS