Descargar Imprimir esta página

Seaga INFINITY Serie Manual De Servicio Y Repuestos página 68

Publicidad

Seaga warrants to the original purchaser that the equipment is free from defects in material and factory workmanship for a period of one
(1) year from date of shipment.
This warranty applies only if the equipment has been serviced and maintained in strict accordance with the instructions presented in the
Operator's Manual and no unauthorized service, repair, alteration or disassembly has been performed. Any defects caused by improper
power source, poor water quality or pressure, an installed water filtration system not fully functioning, abuse of the product, accident,
alteration, vandalism, improper service and maintenance schedules, neglecting to de-scale and sanitize on a regular basis, use of
products or ingredients not allowed in the machine, corrosion due to use of non-approved detergents or cleaning solutions, or damage
incurred during return shipment will not be covered by this warranty. Further, equipment that has had the serial number removed, altered
or otherwise defaced will not be covered by this warranty.
Lighting components, refrigerant, glass, paint, decals, fuses, filters or hygiene replacement parts, labor and/or installation are not covered
by this warranty.
Follow proper maintenance procedures and use of equipment, as described in the Operator's Manual provided on Seaga's web site at
seaga.com, which include but are not limited to:
Cleaning of equipment including regular maintenance
Proper installation and location of equipment with respect for the indicated temperature and humidity levels
Proper use of equipment including loading, programming and setup
THIS WARRANTY IS EXCLUSIVE AND IS GIVEN BY SEAGA AND ACCEPTED BY BUYER IN LIEU
OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING,
WITHOUT LIMITATION, ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
DISCLAIMED BY SEAGA AND WAIVED BY BUYER.
assume for it any obligation or liability in connection with the sale of said unit(s) or any part(s) thereof.
Repair or replacement of proven defective parts is limited to manufacturing defects demonstrated under normal use and service during
warranty period. Contact Seaga's Customer Care Department to be assigned a Return Authorization (RA) number. Seaga requires
complete information including the serial number(s) of the machine(s), date of purchase and description of the part and/or suspected
defect. Seaga may also be contacted, with complete information, by phone: 815.297.9500, by fax: 815.297.1700 and also by email:
customercare@seaga.com
Send defective part(s), assembly or complete unit, Attention to the RA Number, prepaid or delivered to:
Seaga will repair or replace, at our option, any covered part which meets the provisions herein during the warranty period. It is our
discretion to replace defective parts with comparable parts. Seaga reserves the right to make changes or improvements in its products
without notice and without obligation, and without being required to make corresponding changes or improvements in equipment already
manufactured or sold.
Revision 1.EL950 1.3.925 ESP 17.01
LIMITED WARRANTY
ALL SUCH OTHER WARRANTIES ARE HEREBY EXPRESSLY
700 Seaga Drive
Freeport IL 61032
68
Seaga neither assumes nor authorizes any person to
SMI2457304

Publicidad

loading