Publicidad
Idiomas disponibles
Idiomas disponibles
Protections
When a protection is triggered, the power supply will shut down and the
LED on the POWER/PROT button will light red. Check the cause of the
problem and turn on the power supply.
The protection features present are:
▪ Internal AC input fuse: Internal short circuit protection of the source.
▪ DC output short circuit: Protection against short circuit and overload at
the output.
▪ Low voltage (Undervoltage): Protection of output voltage below 7.5Vdc.
▪ Temperature: Intelligent monitoring that regulates the operation of the
power supply according to the temperature, preventing it from shutting down.
Technical Specifications
AC input voltage:
Min. and max. AC voltage:
DC output voltage modes:
Nominal chain:
Maximum power consumption:
Efficiency:
Operating modes:
LED indicators:
AC input protection:
Under Voltage Protection:
Dimensions (H x W x L):
Weight:
Any updates made in this manual will be available for consultation by the consumer free of charge
on the brand' site. It is recommended that the updated manual be consulted whenever necessary.
Images contained in this manual are merely illustrative, and may differ from the real product.
Automatic Bi-volt (127Vac/220Vac)
127V: 80V ~ 140V / 220V: 160V ~ 240V
12.6V / 13.8V / 14.4V / 15.4V
50A @ 12.6V
127V: 10.5A / 220V: 6A
Slow Load / Fast Load / Full Load
Red LED: Stand By/Prot
LED blue: Product in operation (ON)
LED green: 15.4V mode ON
Fuse 15A
2.4" x 6.8" x 7.2"
20
90%
7.5V
3 lb
Publicidad
