Continental CE-WFN601 Manual De Usuario página 4

PART FIGURE
NO.
1 Front Grill
2 Spinner
3 Blade
4 Plastic nut
Note:
All the pictures in this manual are for explanation purpose only. Any discrepancy
between the real object and the illustration in the drawing shall be subject to the
real subject.
GRILL & FAN BLADE ASSEMBLY
Fig.1
Fig.2
Clip
Fig.3
Description
1. Unscrew the spinner clockwise (or take the spinner out
from the bag) and the plastic nut counterclockwise to
remove both of them. Fix the rear grill to the motor then
tighten the plastic nut again. (Fig. 1)
2. Insert the blade into shaft, and make sure the rotor shaft
pin is tted into groove of the blade. Turn the spinner
counterclockwise to tighten the blade. (Fig. 2)
3. Fasten the front grill and the rear grill by the grill clip
(Fig. 3)
NO. Description
5 Rear Grill
6 Motor shaft
7 Motor
3