AMS AL 402 Manual Del Usuario página 4

CONTROLS & FUNCTIONS
1. Select the operating mode sliding the switch to the desired position (8Ω or 100V line).
2. Connect the output amplifier to the corresponding pair of terminals.
3. Check the polarity of the connection.
CAUTIONS
To prevent burning of fire
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Do not replace with non-original spare parts. Contact your AMS dealer.
Unpacking
Note: Before unpacking, check it for possible damage that might have occurred during transportation or
not. If you find any damage, please do not use the unit and contact the AMS dealer.
3