AMS BUB 25 MKII Manual Del Usuario página 4

CONTROLS & FUNCTIONS
Before starting up the equipment, make sure that the front, lower and rear vents are free and the front
tank is full of bubble liquid (1 litre), taking care never to exceed the mark on the tank.
Select the operating mode by switching between position ( I ) Remote Control and
position ( II ) Manual.
To operate the equipment remotely with position (I) selected, start the equipment by
pressing on the remote control, to stop the equipment, press the button
the remote control.
CAUTIONS
To prevent burning of fire
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Always use the consumable recommended by AMS.
4. Do not replace with non-original spare parts. Contact your AMS dealer.
Unpacking
Note: Before unpacking, check it for possible damage that might have occurred during transportation or
not. If you find any damage, please do not use the unit and contact the AMS dealer.
on
3