Descargar Imprimir esta página

AMS AM MINI 5 Manual Del Usuario página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

7. STEREO INPUTS: RCA connectors for 2/3 and 4/5 stereo channels (LINE Level).
8. MAIN LINE Output: These RCA L & R connections send the main mix to an amplifier.
9. CH 2/3 and 4/5 VOLUME knob: These allows to control the final gain of inputs 2/3 and 4/5.
10. USB VOLUME: It allows to control USB/Bluetooth volume.
11. STEREO Level: It allows to control main mix volume.
12. PHONES Level: It allows to control monitor mix.
13. USB/BT interface: This interface includes a display with state and track information, buttons for
PLAY-PAUSE/REW/FF and MODE selector.
USB slot: Insert a USB pendrive with audio tracks. Use the buttons |<<, >>| to navigate between
them and press play when you find the desired track.
14. PHONES output: Connect a headphones to monitor the mix.
15. POWER Switch: Push down to switch on the mixer and push up to switch off the mixer.
INSTALLATION
CONVENTIONAL MIXER OPERATION
You can connect the external power supply or the USB cable to a PC. In both cases, this connection is
ONLY FOR SUPPLY PURPOSES.
-
USB MP3: Insert a USB pendrive with audio files in MP3 format and press the PLAY ">||" button,
Use the buttons "|<<, >>|" to navigate between the audio tracks.
-
Bluetooth: Press MODE button until you see "BLUE" in the display. Check in your smartphone the
device name: MIX-MP3 BT and link it.
-
REC Mode: Insert a USB pendrive, press Mode button until you see "REC", then push PLAY ">||"
and counter the counter will start running indicating the seconds of recording. To end the
recording, long press the PLAY button.
SOUND CARD OPERATION
- You can connect with a USB type A to type A cable to a PC. This connection WILL SUPPLY THE MIXER
and ACT AS INTERFACE.
- It will appear "PC" in mixers's display.
You can select in the setup menu of your computer this mixer named "JieLi BR2" as an input device,
output device or both, depending on the configuration you need.
please
4

Publicidad

loading