Publicidad
Idiomas disponibles
Idiomas disponibles
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 2 OF 4
ASSeMBlY (ConTInued)
B
A
Figure 2
C
Figure 3
D
Figure 4
F
E
Figure 5
3. Place side support pieces (B) in the middle of the
upright posts at desired middle shelf height.
(See Figure 2)
4. Connect the two upright post assemblies by inserting
front/back supports (C) at the top and bottom of each
upright post. (See Figure 3)
noTe: Be sure the supports are fully seated before
continuing with assembly.
5. Repeat step 4 for installation of all other front/back
supports.
6. Attach shelf supports (D) at each level by placing the
keyhole slots (on shelf support) over the rivets (on the
inside of the front/back support) and tapping them into
place. (See Figure 4)
Recommended number of shelf supports per shelf are as
follows:
36" / 48" / 60" W −1 Shelf Support
72" W −2 Shelf Supports
96" W −3 Shelf Supports
7. Set boards (E) or wire (F) on top of shelf supports, side
supports, and front/back supports. (See Figure 5)
1-800-295-5510
uline.com
0613 IH-1060
Publicidad
