Bartscher GMS600 Manual De Instrucciones página 47


Make sure that the device is earthed.

During positioning of the cutter take into consideration space required for
positioning, as well as place for container collecting cut vegetables and products to
be cut. Leave sufficient free space around the cutter to assure free movements of
operator and for movement of third persons.

The location of the device must be properly illuminated, illumination must include the
whole work station and must not dazzle the operator.

Do not cover or block the device ventilation holes in order to avoid overheating or
injuries and damages.

Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.

Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the type plate and warning signs from the device.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!

The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
- 43 -