ECOPOSTURAL C3609 Instrucciones página 11

English
1) GENERAL INSTRUCTIONS
- Please read carefully the operating and safety instructions before using our products. These instructions
must be adhered to. Keep the instructions booklet for further check-ups.
- Familiarize yourself with the precise use of the item.
- If the table is handled by unqualified people in an inappropriate way or not according to the intended
purpose, the use of the examination table may be dangerous. Be careful when handling the table as there
is a risk of being trapped by the mobile parts and because of sudden movements.
- Regularly check the table entirely to find any sign of malfunction or damage.
- Every single part or component of the table follows a thorough quality control thus ensuring a smooth
finish. Nevertheless, proceed with caution when handling the table because there might be any corner or
protruding part which might result unintentionally harmful.
- Worn or damaged pieces must be solely replaced by original pieces by the manufacturer depending on
the table model.
- All components parts or accessories should be fitted or fixed in according to the special manufacturer's
instructions. Any spare / replacement component part different to the manufacturer's could be dangerous
for the people involved in the table handling.
* Notice: The use of non original pieces or the alteration of the item will incur in a loss of validity
of the manufacturer's guarantee, instructions and Declaration of Conformity.
The design of the different sections and tilting angles obeys to the standards of specific
profesional areas such as the physiotherapy, rehabilitation and related disciplines, hence the
specific dimensions conforming to these practices.
ATTENTION: Be careful, as there is a risk of entrapment between moving and/or fixed
parts and due to unexpected movements. Only operate the stretcher when there is no
possibility that any part of the body could be trapped and injured while moving the
stretcher up/down or activating the tilt of the component modules.
2) OPERATING INSTRUCTIONS
a) SET UP
Set up procedure:
- Gently set the table on its edge, on the little rubber feet.
- Unlock the clasps and open the table up slightly by unfolding the legs and the top sections.
- Unfold one leg first, then the other one so as to avoid any obstruction (1). Open the legs wide minding
that the cables are not trampled (2).
- Once the table is completely open and still leaning on its edge (2), grab the edge of the table with your
11