Descargar Imprimir esta página

monzana GHCM1500 Manual De Instrucciones página 8

Crêpemaker

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
BEFORE FIRST USE
Make sure that all packaging material is removed.
Unwind the power cord completely. Heat up the appliance for 4 minutes.
A slight odour will develop when the appliance is heated up for the first time, so ensure that there
is sufficient ventilation. This smoke is NOT harmful.
Then leave the appliance to cool down and clean it as described under 'Maintenance and care'.
OPERATION
Unwind the power cord completely. Plug the mains plug into a socket.
The indicator light switches on when a power supply is recognised. The thermostat light switches
on when the appliance reaches operating temperature. It will then light up at regular intervals to
show the temperature is being maintained. The temperature control dial allows you to set the
temperature effectively. Set the temperature control to MAX. to heat up the appliance.
Add a little batter to the centre of the cooking plate.
The supplied batter spreader must be moistened with water before use to ensure the batter
spreads smoothly.
The crêpe can be moved once the surface of the crêpe is no longer runny. Lift the edges of the
crepe to check that it is golden brown underneath. Turn the crêpe over with a wooden spatula
after approx. 2 minutes, as soon as the surface is set and the edges loosen.
The crêpe should be golden brown after another 2 minutes.
It can then be removed from the cooking plate. If you want to stop or interrupt the cooking
process, set
the temperature control dial to MIN.
Allow the crêpe to cool slightly before eating.
MAINTENANCE AND CARE INSTRUCTIONS
Always switch off the appliance and disconnect the mains plug before carrying out maintenance
or inspection work.
Check all the parts for signs of wear. Do not continue to use the product if you find any defects.
Parts should only be replaced with original spare parts, and by a specialist, in accordance with the
manufacturer's specifications. A lack of care and maintenance can damage the appliance.
Dangerous situations can arise. To ensure electrical safety, the appliance must not be subjected
to liquids or be immersed in them. Regular maintenance helps to ensure the safety of the product
and increases its service life.
Clean the appliance promptly after each use. If residues stick and harden, the appliance is more
difficult to clean. Do not use harsh or abrasive cleaners. Wipe the appliance with a damp cloth.
Ensure that no liquids enter the appliance.
TECHNICAL DATA
Item number
Model
Rated voltage
Power consumption
107264
GHCM1500
220-240 V ~ 50-60 Hz
1200 W
8
www.DEUBAXXL.de

Publicidad

loading

Este manual también es adecuado para:

107264