Samsung LE32R3 Manual Del Propietário página 13

Assigning Channels Names
Fine Tuning Channel Reception
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the
to select "Channel", then press the ENTER button.
2. Press the or button to select "Name", then press the ENTER button.
3. If necessary, select the channel to be assigned to a new name by
pressing the or
The selection bar is displayed around the name box.
4.
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5.
Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Use fine tuning to manually adjust a particular channel for optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the or button to select "Channel",
then press the ENTER button.
3. Press the or button to select "Fine Tune", then press the
ENTER button.
4. Press the or button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "
right-hand side of the channel number in the channel banner. And the channel number turns
red.
To reset the fine-tuning, select "Reset" by pressing the
ENTER button.
English-11
button. Press the ENTER button.
or button
Then...
Press the or button
Press the button
Press the button
Press the ENTER button
" on the
*
or button and then press the