EFALOCK Professional eGLADIO Instrucciones De Uso página 10

How to use
1. Remove the foil protection.
2. Set the ON/OFF switch to ON position.
3. Clean the shaver thoroughly after every use.
4. Attach the foil protection after every use.
CLEANING, CARE, STORAGE
▷ Before maintenance, switch off the device and disconnect it from the power supply.
▷ Only clean the device when it has cooled down!
Cleaning the device
• Wipe the device with a damp or soft cloth.
• Do not use aggressive cleaners, scouring agents or solvents.
Removing the foil unit
Cleaning the foil unit and lamella blades
▷ Only use the supplied brush for cleaning.
Remove the foil unit. Gently brush the hair from the lamella blades and around them, using the
cleaning brush. Gently beat out the hair with the bottom side of the foil unit.
MAINTENANCE
▷ For the best shaving performance and results, it is recommended to replace the shaving foil
and lamella blades every six months.
Replacing the foil unit with dual shaving foils
Remove the foil unit. Place the spare foil unit above the blades. Make sure not to damage the shaving
foils. Gently push down the foil unit until it clicks into place.
Replacing the lamella blades
ENGLISH
Press the locking button (5) on the side of the shaver; hold
3. Foil unit
the foil unit (3) on both sides and gently pull it upwards.
5. Locking button
Remove the lamella blade: Hold it on both sides and pull it
A. metal pin
upwards.
B. notch
Insert a new lamella blade: Align the small metal pin (A) on
the bottom side of the lamella blade with the notch (B) in the
plastic rod on the shaver. Firmly push down the lamella blade
until it clicks into place.