Orbegozo TWM 1010 Manual De Instrucciones página 8

TWM 1010
1. DESCRIPTION
2. ASSEMBLY INSTRUCTIONS
1. Remove all items of packaging from the tower fan.
2. Pass the power cord through the middle of the two bases pieces.
3. Position base piece onto the support posts of the other base piece to create
the base assembly.
4. Screw the base assembly onto the pedestal tube with the supplied screws.
5. Position the power cord into the provided cord track in the rear base.
6. Turn the tower fan back to an upright position. It is now ready for use.
3. DIGITAL DISPLAY
4. HOW TO USE (Caution: Fan must be assembled with the base before use!)
-
Connect the machine to the power supply.
-
Press the "ON/OFF" button to turn on the fan.
-
Press the "ON/OFF" button again, fan will be switch off.
-
Select Low, Medium and High speed by pressing "SPEED" utton.
-
Select Normal, Natural, Sleep winds mode by pressing "MODE"
button.
-
Press "OSC" button to turn on the oscillation function. Press again to
turn off.
-
Press "TIMER" button, to set up to 1 hour to 12 hours timer setting.
-
Press "ION" button to start the ionizer function. Press again to turn off.
-
Disconnect the power cord after each use.
8